Lubrication

MAKE AN ENQUIRY

Can-Am Chains Autogreaser

The only Single Point Automatic Lubricator manufactured in Great Britain.


Self Contained Automatic Lubrication

Normal chain wear is often the result of friction between the rivet and the ID of the barrel. Sprocket size and pitch angle will determine the relative motion between parts, and the degree of wear.

Lubrication of these surfaces would reduce wear and slow the process of corrosion.

Since lubrication significantly reduces the amount of wear to the chain, it would seem to be good economics to pre-lube the chain at the point of manufacture and to lubricate that chain throughout its service life. Even a fine spray of water adds to service life. Each different conveyor installation has different requirements regarding lubrication. Our technical team can advise on the best solutions to achieve long conveyor life.

Advantages of AUTOGREASER automatic lubrication

AUTOGREASER single point automatic lubricators are the most cost effective alternative to manual lubrication. In reality manual lubrication either doesn’t get carried out enough or gets carried out too much. Both under and over lubrication cause premature bearing/machine failure.

AUTOGREASER OPTIMUM LUBRICATION

The AUTOGREASER supplies a continuous and precise volume of lubricant providing optimum lubrication.

Manual/Grease Gun Lubrication

  • No further need for costly time consuming manual lubrication.
  • Labour saving/less labour intensive maintenance.
  • Improved health and safety.
  • Reduction in lubricant consumption.
  • Lessen environmental impact.

ASSET RELIABILITY/CARE

  • Reduced costly downtime and failures.
  • Improved production performance.
  • Extend asset life.
  • Reduce maintenance costs.

RATIONALISE/SIMPLIFY

  • Ensure the correct lubricant is being used in the correct quantity, in the correct place at the correct time.
  • No more cross contamination of lubricants.
  • No more ingress of contaminates into the application.

Advantages  of AUTOGREASER automatic lubrication

  • Easy to use. No starter screws or tools required.
  • Hermetically sealed.
  • Flexible duration settings 1, 2, 3, 4, 6, 8 and 12 months.
  • Contains no hazardous batteries/cells inside for easy disposal.
  • Wide operating temperature range.
  • Can be fitted remotely up to 5 metres away from application.
  • No costly/unnecessary power pressure/booster required.
  • Pressure relief valve to notify of blocked lubrication pathway.
  • All lubricants used in the AUTOGREASOMATIC are tested for suitability.
  • Large range of over 200 lubricants to choose from.
  • FREE lubricant suitability testing for customers.
  • Easy to inspect/observe dispensing progress through clear graduated sight viewing window.
  • Robust and reliable product.
  • Safe for use in hazardous zones 1 & 0 and classified under the ATEX DIRECTIVE 94/9/EC as not having it’s own source of ignition, making it the only choice for mining underground and oil production offshore.
  • Wind Turbines – Yaw, pitch & main bearings
  • Quarrying – Greasomatics fitted remotely 5 metres away from the conveyor bearings
  • Chains – Using oil and brush assembly
  • Food & Beverage – Transfer conveyor
  • Waste Water – Screening equipment
  • Power Generation – Coal transfer conveyor
  • Open Gears – Brush application
  • Waste Water – Process equipment
  • Foundries
  • Underground & Surface Mining
  • Plastic Moulders
  • Oil Refineries/Rigs Lifts/Elevators
  • Dockside Equipment
  • Airports
  • Steel Manufacturing

The AUTOGREASER single point lubricator is supplied with a wide range of world class greases and oils. Fitting a AUTOGREASER will reduce downtime and protect bearings & machinery from failures and unplanned maintenance.

A SAFE PAIR OF HANDS

We pride ourselves on industry leading pre-sales advice and customer support. If you are not sure which product to choose, the team at Can-Am Chains office or our field-based staff can help identify appropriate lubricators and lubricants for your installation, including site surveys where required.

We understand that there are some situations where a stand-alone single point lubricator will not be the appropriate solution. We have skilled and experienced engineers available to help you implement bespoke lubrication systems.

MANUFACTURED WITH PRIDE IN GREAT BRITAIN

Every single point lubricator that we sell is hand assembled in Great Britain. In order to maintain the highest standards, the majority of components are sourced from local companies with a long track record of supplying us.

Our Quality Assurance processes and procedures ensure you can trust every AUTOGREASER that you order to be reliable

MAKE ENQUIRY

FOR SALES ENQUIRY, MAINTANENCE AND THECHNICAL SUPPORT PLEASE CONTACT US DIRECTLY: +44 (0) 191 229 0800

ALTRENATIVE PLEASE FILL IN THE CONTACT FORM HERE AND WE WILL REPLY DIRECTLY